68 min
Journey time
₹60
Token fare
29.9 km
Distance
30
Stations
2
Interchanges
Your route
2 interchanges · follow the steps below
Interchange
Red Line → Yellow Line
Total stations: 33
Step-by-step directions
-
Board at Jhilmil
Enter via Gate 1, 2. Take the Red Line towards Rithala. Trains run every 3–5 minutes.
-
Change at Kashmere Gate
Get down and board the Yellow Line towards Samaypur Badli. Allow ~3 minutes for the interchange.
-
Change at Sikanderpur
Get down and board the Rapid Line towards Sector 55-56 (Rapid Metro). Allow ~3 minutes for the interchange.
-
Arrive at Phase 2 (Rapid Metro)
Exit through the gate closest to your destination (see exit gates below). Total journey time: 68 minutes.
Exit gates
Pick the right exit to save a walk
Jhilmil (boarding)
- Gate 1 Jhilmil
- Gate 2 DDA Flats
Phase 2 (Rapid Metro) (your exit)
- Gate 1 Office Side
- Gate 2 Housing Side
First & last train (Red Line)
First train5:00 AM
Last train11:30 PM
Frequency3–5 min
First & last train (Yellow Line)
First train5:00 AM
Last train11:30 PM
Frequency3–5 min
First & last train (Rapid Line)
First train5:00 AM
Last train11:30 PM
Frequency3–5 min
Fare (one way)
Token / UPI₹60
Smart Card
₹52
save 13%
Distance29.9 km
This route uses Red Line, Yellow Line, Rapid Line. Follow the route map and step-by-step directions for where to change lines.
You need 2 interchanges on this route. Check the journey steps for where to change.
₹60 by token/UPI, or ₹52 with a Smart Card.
31 stations in total: Jhilmil, Mansrover park, Shahdara, Welcome, Seelam Pur, Shastri Park, Kashmere Gate, Chandni Chowk, Chawri Bazar, New Delhi, Rajiv Chowk, Patel Chowk, Central Secretariat, Udyog Bhawan, Lok Kalyan Marg, Jorbagh, Dilli Haat - INA, AIIMS, Green Park, Hauz Khas, Malviya Nagar, Saket, Qutab Minar, Chhattarpur, Sultanpur, Ghitorni, Arjan Garh, Gurudronacharya, Sikanderpur, Sikanderpur (Rapid Metro), Phase 2 (Rapid Metro).
Board via Gate 1–2 at Jhilmil. At Phase 2 (Rapid Metro), Gates 1 / 2 are the most useful exits.